Steelcase Garland Round Table Top with a Disk Base Installation page 4

Panel Base Installation
1.
Align dowels with holes
in top panel.
2.
Using holes in mounting bracket
as guide, pilot drill (12) holes 1/8"
(3.1mm) dia. and 1/2" (12.7mm)
deep.
3.
Install (12) screws.
4.
Install support bracket with
(5) 7/8" screws as shown.
5.
Repeat procedure for
other base assembly.
3
(12) screws
1
Dowels
Mounting Bracket
4
Support Bracket
Page 4 of 5
Y9501757 Rev. M