Advertisement
2.
Carefully turn top over onto carpet
or other soft, clean material.
3.
Locate and install base assembly.
NOTE: If using a rectangular or square top,
make sure base is mounted in a diagonal
orientation (see above) to top.
The drawing below shows the incorrect
positioning of the base with top.
(3) screws per leg
3
Locate base with
(1) pilot hole per leg.
Page 3 of 5
Y9501757 Rev.M
Advertisement
Need help?
Do you have a question about the Garland Round Table Top with a Disk Base and is the answer not in the manual?
Questions and answers