Program Installation; Installation Of Operation Program - Autonics PMC-1 HS User Manual

2. Program Installation

2.1

Installation of Operation Program

(1)Insert the CD given to a CD drive of a PC.
【Caution】Do not connect the PMC-HS body to the PC at this time.
(2)For Windows 98, ME and 2000
Windows 98 and ME ---- Run InstMsiA.exe in the InstMS folder.
Windows 2000----------Run InstMsiW.exe in the InstMS folder.
For Windows XP, additional installation is not required.
(3)Double-click PMC.msi file on the Install folder.
(4)Select the Next button to go to the following screen.
(6)The progress of the installation is displayed.
© Copyright Reserved Autonics Co., Ltd.
(5)Select the desired folder and click the Next but-
ton to go to the following screen.
(7)The Installation Complete screen is displayed
Click the Close button to close the installer.
2. Program Installation
5