Mobile Phone Bluetooth Control - Keywish Hummer-Bot-1.0 Instruction Manual

3.2.6 Mobile Phone Bluetooth Control

3.2.6.1 Suite Introduction
Hummer-Bot supports Bluetooth mobile phone Bluetooth remote control function is JDY-16 BLE
(Bluetooth Low Energy).JDY-16 transparent transmission module is based on the Bluetooth 4.2 protocol
standard, operating frequency range is 2.4GHZ range, modulation mode is GFSK, maximum transmission
power is 0db, maximum transmission distance is 80 meters, adopts original imported chip design, and
supports users to modify device by AT command. Names, service UUIDs, transmit power, pairing
passwords, and other instructions are convenient and quick to use. For module information, see
"Hummer-bot\Document\JDY-16-V1.2(English manual).pdf"
The physical diagram of module is shown in Fig.3.2.40.
◆
JDY-16 function introduction
◆
BLE high speed transparent transmission supports 8K Bytes rate communication.
◆
Send and receive data without byte limit, support 115200 baud rate continuously send and receive data.
◆
Support 3 modes of work (see the description of AT+STARTEN instruction function).
◆
Support (serial port, IO, APP) sleep wake up.
◆
Support WeChat Airsync, WeChat applet and APP communication.
◆
Support 4 channel IO port control.
◆
Support high precision RTC clock.
◆
Support PWM function (can be controlled by UART, IIC, APP, etc.).
◆
Support UART and IIC communication mode, default to UART communication.
◆
iBeacon mode (support WeChat shake protocol and Apple iBeacon protocol).
◆
Host transparent transmission mode (transmission of data between application modules, host and slave
communication).
Fig.3.2.40 JDY-16 Module
88