Table of Contents
Advertisement
Manual adjustment is shown in the following diagram:
3.2.2.4 Wire connection
As the figure shown below, the upper column is the "GND" interface, the middle column is the "VCC"
interface, and the lower column is the "OUT" interface, where "A3" corresponds to the "OUT" of the left
infrared obstacle avoidance, and "A4" corresponds to the "OUT" of right infrared obstacle avoidance.
Figure .3.2.12 Diagram of Distance Detection Adjustment
Figure 3.2.13 Wire connection diagram
44
Adjustable
Potentiometer
Advertisement
Table of Contents
Need help?
Do you have a question about the Hummer-Bot-1.0 and is the answer not in the manual?
Questions and answers