Chapter3 Experiments; Assembly Of The Car; Motor Installation - Keywish Hummer-Bot-1.0 Instruction Manual

Chapter3 Experiments

3.1 Assembly of the Car

3.1.1 Motor installation

Step1: You need to install the motor mount.
Figure 3.1.1 Schematic diagram of motor mounting
Note: You need to use the screw to pass through the front hole of the motor, the motor holder corresponds to
the opposite position and use the nut to fix the motor holder.
Figure 3.1.2 Effect diagram of motor mounting
Step2: You need to solder the wire to the motor.
13