Advertisement
Available languages
Available languages
4
Installation
NOTE:
Before installation, please inspect the unit. Be sure that nothing inside
the package is damaged. Please keep the original package in a safe
place for future use.
The UPS can protect your equipment from all power problems such as
surges, spikes, blackouts, brownouts and line noise. When the AC is feeding
the UPS directly from the wall outlet and the UPS is turned ON it charges
the battery while the UPS is functioning normal. The battery gives back-up
power for every task that needs urgent completion, in case of unfortunate
events as blackouts.
The UPS is simple to install and operate. Please read the following steps
before connecting any equipments to this UPS:
4.1
Connecting your equipment and first usage
Step 1. Connect the UPS to a grounded AC power outlet.
Step 2. Turn on the UPS: Press the ON button on the front panel for two
seconds to power on the UPS. The battery charges fully during the
first 6 hours of normal operation. Do not expect full battery run
capability during this initial charge period.
Step 3. Plug your PC or peripheral equipment (printer, tv, scanner, fax,
speakers etc.) into the power outlets of the UPS
emergency battery backup power during power blackouts as well
as surge protection from surges and spikes).
Step 4. Communication connection: To allow for unattended UPS shutdown/
start-up and status monitoring, connect the communication cable
on one end to the USB port and the other to the communication port
of your PC. With the monitoring software installed, you can schedule
UPS shutdown/start-up and monitor UPS status through PC.
08
(these will provide
Step 5. Install software: For optimal computer system protection, install
the UPS monitoring software from
download.com/viewpower.html
NOTE:
The battery charges fully during the first six hours of normal
operation. Do not expect full battery run capability during this initial
charge period.
CAUTION
Do NOT plug LASER
PRINTERS into any of
the outlets.
https://www.power-software-
to fully configure UPS shutdown.
Do NOT plug any SURGE
STRIPS into any of the
outlets.
09
Advertisement
