Remote Module Switches - ADDER X2 User Manual

REMOTE module switches

OFF: Normal operation
ON: Flash upgrade
Determines configuration
of hotkeys in conjunction
with switch 2
Note: When shipped, all switches are set in the OFF positions and this will
produce normal operation.
REMOTE module switches (continued)
REMOTE Switch 1
Determines configuration
of hotkeys in conjunction OFF: Normal operation.
with switch 3
ON: (Before power is applied) Places the REMOTE module into flash upgrade
Reserved for mode so that the internal software can be changed. Please see the 'Flash
future use
upgrade' section in the 'Special configuration' chapter.
REMOTE Switches 2 and 3
Switches 2 and 3 determine which two keyboard keys (when pressed in unison)
are to be designated as 'hotkeys'. Hotkeys signal to the REMOTE module that
the next key to be pressed is a special configuration command for the module
and is not to be passed to the computer system.
2 OFF
3 OFF
2 OFF
3 ON
2 ON
3 OFF
2 ON
3 ON
REMOTE Switch 4
This switch is reserved for future use.
Hotkeys = CTRL and SHIFT
Hotkeys = ALT and SHIFT
Hotkeys = CTRL and ALT
Hotkeys disabled
6