Table of Contents
Advertisement
If the driver is not present, download and install the
Downloading the Flash Memory
Note:
While this section discusses use of STerm, any terminal emulator can be used. STerm can
be downloaded from
here.
1. Open STerm.exe application. The screen should appear as shown below:
2. Change the COM Port to what was seen in the device manager
3. Use the following settings:
Kilo User Manual Version 3.0
Silicon Labs CP210x Device
Baud Rate
57.6k
Parity
None
Data Bits
8
Stop Bits
1
driver.
26
Advertisement
Table of Contents
