Xeos Technologies Inc. Kilo User Manual page 33

Drop the batteries into the main body of the Kilo. At the bottom of each slot, there is either a
'spring' or a 'button'.
 For slots with buttons, drop the batteries with the negative end facing up.
 For slots with springs, drop the batteries with the positive end facing up.
Restore the loose battery board to the top of the batteries. The board is constructed such that
all 3 possible orientations are valid.
After inspecting the O-rings and seating surfaces, screw on the Kilo's endcap. The device will
power up immediately. If the batteries are low, or have been inserted incorrectly, the Kilo will
sound a quick repeating beep and flash the red LED at the top for 5 minutes or until the batteries
have been corrected or replaced.
Kilo User Manual Version 3.0
K B O
ILO ATTERY RIENTATION
33