Flash Memory - Xeos Technologies Inc. Kilo User Manual

Flash Memory

The Kilo comes equipped with internal flash memory, used to store logged events and GPS
positions over the lifetime of the product. This information can be retrieved for data collection
or troubleshooting purposes. The retrieval of this information is done through the Micro-USB
port at the top of the battery core.
Hardware Required
 A micro-USB programming cable
 The Kilo unit with batteries removed
 A Windows PC
Software Required
 Terminal Emulator
 Silicon Labs CP210x USB to UART driver
Kilo Connection
1. Unscrew the battery end-cap from the Kilo and set aside
2. Remove all batteries from the Kilo.
electrical damage to the Kilo
3. Carefully plug the micro-USB cable into the Kilo's connector and plug the
USB into the PC
Navigate to the computer's device manager to check if the Silicon Labs CP210x chipset is
recognized by the computer.
Kilo User Manual Version 3.0
Warning: Failure to remove batteries may cause
25