Flash Memory; Dumping The Flash Memory - Xeos Technologies Inc. Rover User Manual

Flash Memory

The Rover comes equipped with internal flash memory, used to store logged events and GPS
positions over the lifetime of the product. This information can be retrieved for data collection
or troubleshooting purposes. Since the Rover comes equipped with Bluetooth for configuration
with the Xeos Beacon Android App,
Refer to the Bluetooth App Guide

Dumping the Flash Memory

 Connect to the Rover using the Bluetooth App for Android. If The device does not
appear as advertising on the main page do one of the following:
 Power cycle the device with a magnet or temporary battery removal
 Send the device the following command over Iridium: $btpwr 1
 Navigate to the terminal page
 Use the terminal page to send the flash dump command: $fdumpall
 The entire memory log of the device will begin outputting into the terminal tab. When
the output slows, the dump is complete.
 Output from the Terminal page can be saved to your device in the form of a text file by
tapping the diagnostic output, and tapping Save Output.

 The saved file will appear in the Android device's Downloads directory.
Rover User Manual Version 3.0
this method of communication requires no disassembly.
for more information on the app itself.
29