Deployment Of The Kilo - Xeos Technologies Inc. Kilo User Manual

Submersible iridium/gps beacon
Table of Contents

Advertisement

Deployment of the Kilo

The Kilo is intended for use on marine
flotation devices. It is important that the
top of the Kilo is located as high above the
surface of the water as possible. Both the
Iridium and GPS antennas are located at
the top of the unit. It is recommended
that users install Kilo on a mast or
superstructure at the top of their surface
buoy or flotation device.
Care should be taken when installing to
avoid putting metal bands close to the top
of the unit where the antennas are
located.
 Alongside a wall or tall obstruction
will cause coverage to suffer.
 Kilo should not be deployed near
(less
than
1
transmitters.
Kilo User Manual Version 3.0
metre)
other
31

Advertisement

Table of Contents
loading

Table of Contents