Table of Contents
Advertisement
8. The firmware will begin updating right away. Firmware update should take approximately
90 seconds. If the window closes immediately upon executing the file, the firmware
update has failed
9. The Kilo's update progress will be shown in the command prompt window. When it has
completed successfully it will say: 'avr dude done. Thank You.'
10. After programming has successfully completed, unplug the Micro-USB cable from the Kilo
11. Install batteries and reassemble the Kilo
Kilo User Manual Version 3.0
K
U
S
ILO
PDATER
CREEN
38
Advertisement
Table of Contents
