Table of Contents
Advertisement
MTMSN: 0
Time of Session (UTC)
Session Status
Message Size (bytes)
*Unit Location
*CEPradius = 2
*These items can be enabled/disabled by your Iridium provider if desired.
Global Positioning System
Location information generated by the device itself is embedded in the SBD attachment sent via
the Iridium Gateway and can only be seen by viewing in a text editor (Notepad). This position
information is accurate to within several feet of the true position.
Kilo User Manual Version 3.0
Mobile Terminating Message Serial Number; like the MOMSN,
messages to Iridium devices (like commands) also have an
incrementing serial number. Since the message in the
example is from an Iridium device, the MT number is zero.
The time the message arrived at the Iridium Gateway
Each message will have a code determined by how well the
message was received; codes 00, 01 and 02 are acceptable
and will always have their code name (ex. Transfer OK) next to
this number.
The size of the actual message sent by the Iridium device,
which is in the attachment in the email.
The Doppler position of the device as estimated by Iridium's
network. It is
NOT
the GPS position measured by the device.
The numerical value of how accurate the above position is;
with a value of 2,
This means that using the Lat/Long that the
body has supplied, Iridium is 80% confident (always 80%) that
the device sending the message is within a circle, 2 kilometers
in radius, with the Lat/Long given as the centre of that circle.
The higher the CEPradius value, the larger the circle and
therefore the less accurate that position.
11
Advertisement
Table of Contents
