Table of Contents
Advertisement
If the driver is not present, download and install the
Uploading Firmware
1. Note the COM port being used by the Kilo's CP210x USB adapter
2. Create a new folder called AVRDude in the C Drive
3. Download and extract the Kilo firmware update package into the new AVRDude folder.
4. Open Command Prompt.
5. Type in cd\, and hit Enter to bring you to the line C:\>
6. Type cd AVRdude\ to direct command prompt to the AVRdude folder in the C
drive that you have just created. You'll now see the next line read C:\AVRdude
7. Drag and drop the .cmd from your AVRdude folder into command prompt. Then type in
the COM port number previously noted (in our case, 8), and hit Enter.
Kilo User Manual Version 3.0
Silicon Labs CP210x Device
driver.
37
Advertisement
Table of Contents
