Table of Contents
Advertisement
Communicating over USB
The Micro-USB connection at the top of the battery core is used for flash memory dumps and
firmware upgrades through the use of a terminal emulator. Port settings are as follows:
When interfacing with the Kilo over USB, batteries should not be installed. As a consequence, the
device will fail its initial self-test. Sending any character to the device will abort the self-test and
end any beeping.
For information on firmware upgrades, see here.
For more information on flash memory dumps, see here.
Kilo User Manual Version 3.0
Baud Rate
57.6k
Parity
None
Data Bits
8
Stop Bits
1
19
Advertisement
Table of Contents
