Functional Diagram - Quectel EG91 Series Hardware Design

AT Commands
Network Indication
Antenna Interfaces
Physical Characteristics
Temperature Range
Firmware Upgrade
RoHS
NOTES
1)
1. GNSS antenna interface is only supported on EG91-NA/-NS/-VX/-EX.
2)
2. Within operation temperature range, the module is 3GPP compliant.
3)
3. Within extended temperature range, the module remains the ability to establish and maintain a
voice, SMS, data transmission, emergency call, etc. There is no unrecoverable malfunction. There
are also no effects on radio spectrum and no harm to radio network. Only one or more parameters
like P might reduce in their value and exceed the specified tolerances. When the temperature
out
returns to normal operation temperature levels, the module will meet 3GPP specifications again.
"*" means under development.
4.

2.3. Functional Diagram

The following figure shows a block diagram of EG91 and illustrates the major functional parts.
 Power management
 Baseband
 DDR+NAND flash
 Radio frequency
 Peripheral interfaces
EG91_Hardware_Design
Protocol: NMEA 0183
Compliant with 3GPP TS 27.007, 27.005 and Quectel enhanced AT
commands
NETLIGHT pin for network activity status indication
Including main antenna interface (ANT_MAIN), Rx-diversity antenna
(ANT_DIV) interface and GNSS antenna interface (ANT_GNSS)
Size: (29.0± 0.15)mm × (25.0± 0.15)mm × (2.3± 0.2)mm
Package: LGA
Weight: approx. 3.8g
Operation temperature range: -35° C ~ +75° C
Extended temperature range: -40° C ~ +85° C
Storage temperature range: -40°C ~ +90°C
USB interface or DFOTA*
All hardware components are fully compliant with EU RoHS directive
LTE Standard Module Series
EG91 Hardware Design
1)
2)
3)
15 / 93