7 Repairs
8.
Use pulling tool 502 51 61-01 to take out the
crankshaft. The crankhouse bearing should
remain. The guide bushings should remain in the
crankhouse.
502 51 61-01
7.7.2 Assembling the cylinder and crankshaft
1.
Mount the crankshaft with mounting tool
502 50 30-16.
2.
Slip the sleeve over the crankshaft. Screw down
the screws on the crankshaft until they stop. Turn
the nut clockwise while holding down the screw.
502 50 30-16
3.
Mount a new gasket on the crankshaft cover.
Check that the guide bushings are in place.
32
8015-023
8015-024
8015-025