Husqvarna 356BTx Workshop Manual page 27

Tip: Use a bit so as not to damage the key handle.
12. Dismantle the four screws of the fan wheel. Hold
down the fan wheel and remove the screws.
13. Dismantle the two starter hooks. Lift out the
starter hooks with the accompanying spring and
screw.
14.
Loosen the centre nut. Use pulling tool 502 51 49-02 to
take out the hub.
502 51 49-02
15. Dismantle the five screws that hold the motor
package in the fan spiral.
7 Repairs
8015-018
8015-019
8015-020
27