Husqvarna 115 31 90-95 Operator's Manual

Husqvarna blower operator's manual.
Hide thumbs

Advertising

Advertising

WARNING
The engine exhaust from this product contains
chemicals known to the State of California to cause
cancer, birth defects or other reproductive
WARNING
Before using our products, please read this manual
carefully to understand the proper use of your unit.
APPLICABLE SERIAL NUMBERS: 00100101 and up
Operator's manual
130BT
350BT/BF
370BTS/BFS
380BTS/BFS
Origianl Instructions
English
115 31 90-95

Advertising

   Related Manuals for Husqvarna 115 31 90-95

   Summary of Contents for Husqvarna 115 31 90-95

  • Page 1

    WARNING Before using our products, please read this manual carefully to understand the proper use of your unit. APPLICABLE SERIAL NUMBERS: 00100101 and up Operator’s manual 130BT 350BT/BF 370BTS/BFS 380BTS/BFS Origianl Instructions English 115 31 90-95...

  • Page 2: Federal Emission Control Warranty Statement

    AND OBLIGATIONS The EPA (The US Environmental Protection Agency), CARB (California Air Resources Board), Environment Canada and Husqvarna Forest & Garden are pleased to explain the emissions control system warranty on your 2007 and later small nonroad engine. In U.S. and...

  • Page 3: Table Of Contents

    Contents Safety ..........4 SAFETY FIRST .

  • Page 4: Safety, Safety First, Notes On Types Of Warnings, Warning Labels On The Machine, Symbols

    Instructions contained in warnings within this manual and warning seals marked with a blower concern critical points which must be taken into consideration to prevent possible serious bodily injury, and for this reason you are requested to read all such instructions carefully and follow them without fail.

  • Page 5: Symbols On The Machine, Safety Precautions, Working Conditions

    It is extremely important that you read and understand the contents of this Operator’s manual. 10. Husqvarna AB has a policy of continuous product development and therefore reserves the right to modify the design and appearance of products without prior notice.

  • Page 6: Working Circumstance, Avoid Noise Problem, Working Plan, Fuel

    English 1. Refrain from operating the blower if you are tired, ill, or upset, or if you are under the influence of alcohol, drugs or medication 2. To reduce the risk of hearing loss associated with sound levels, hearing protection is required.

  • Page 7: Before Starting The Engine, Using The Product

    It is operated and controlled with the handle on the tube by right hand. 2. Check the work area that the blower will be used in and remove or cover all valuables that may be damaged by the air blast or thrown debris.

  • Page 8: Maintenance, Transportation, Storage

    Improper service to the blower fan and muffler could cause a hazardous failure. 5. When replacing the any other part or any lubricant, always be sure to use only Husqvarna products or products which have been certified by Husqvarna for use with the Husqvarna product.

  • Page 9: What Is What

    <130BT> Frame Harness Engine Cover Volute Case, Cover Air Cleaner Recoil Starter Fuel Tank 10. Pad 11. Spark Plug Cap 12. Shock Absorber (Spring) 13. Band (stopper) 14. Shock Absorber (Rubber) 15. Choke Lever DISPOSAL When disposing your machine, fuel or oil for the machine, be sure to allow your local regulations. Frame:PE (Polyethylene) Harness:Chemical fiber Throttle lever:Metal, Plastic...

  • Page 10

    English <350BT/BF> <350BT> <350BF> Frame Harness Engine Cover Volute Case, Cover Air Cleaner Recoil Starter Fuel Tank 10. Pad 11. Spark Plug Cap 12. Shock Absorber (Rubber) 13. Shock Absorber (Rubber) 14. Choke Lever 15. Control handle DISPOSAL When disposing your machine, fuel or oil for the machine, be sure to allow your local regulations. Frame:PE (Polyethylene) Harness:Chemical fiber Throttle lever:Metal, Plastic...

  • Page 11

    <370BTS/BFS> <370BTS> Frame Harness Engine Cover Volute Case, Cover Air Cleaner Recoil Starter Fuel Tank 10. Pad 11. Spark Plug Cap 12. Shock Absorber (Rubber) 13. Shock Absorber (Rubber) 14. Choke Lever 15. Control handle DISPOSAL When disposing your machine, fuel or oil for the machine, be sure to allow your local regulations. Frame:PE (Polyethylene) Harness:Chemical fiber Throttle lever:Metal, Plastic...

  • Page 12

    English <380BTS/BFS> <380BTS> <380BFS> Frame Harness Engine Cover Volute Case, Cover Air Cleaner Recoil Starter Fuel Tank 10. Pad 11. Spark Plug Cap 12. Shock Absorber (Rubber) 13. Shock Absorber (Rubber) 14. Choke Lever 15. Control handle DISPOSAL When disposing your machine, fuel or oil for the machine, be sure to allow your local regulations. Frame:ABS Harness:Chemical fiber Throttle lever:Metal, Plastic...

  • Page 13: Technical Data

    MODEL 130BT Dimensions (L x W x H) 295x387x432 mm (in) (11.6x15.2x17) Dry Weight kg (lbs) (includ- 6.75 (14.9) ing pipe) Dry Weight kg (lbs) (without 6.1 (13.4) accessories) Fuel Tank Capacity liter (fl. 0.9 (30.4) Engine Type Piston Displacement cu. 29.5 (1.8) cm (cu.

  • Page 14: Assembly, Flexible Hose And Swivel Joint, Control Handle [130bt/350bt/370bts/380bts], Cabling [130bt/350bt/370bts/380bts], Right Handle [350bf/370bfs/380bfs]

    English FLEXIBLE HOSE AND SWIVEL JOINT 1. Connect the blower and swivel joint with flexible hose. Clamp both ends of the flexible hose securely with the hardware supplied with the unit. (1) Flexible hose (2) Swivel joint (3) Clamp (large)

  • Page 15: Blow Pipes, Harness, Waist Belt [350bt/bf] [370bts/bfs] [380bts/bfs]

    NOTE A light lubricant may be used to ease assembly of blower tube. NOTE If longer tube is required, the second straight pipe can be connected with the first one.

  • Page 16: Fuel, Fuel, Fueling The Unit

    - The engines are lubricated by oil specially formulated for air-cooled 2-cycle gasoline engine use. If Husqvarna oil is not available, use an anti- oxidant added quality oil expressly labeled for air- cooled 2-cycle engine use. (JASO FC GRADE OIL or ISO...

  • Page 17: Operation, Control Arm [350bf/370bfs/380bfs], Starting Engine

    (4)STOP [130BT/350BT/370BTS/380BTS] as shown in F19 (5)Stop Switch [350BF/370BFS/380BFS] as shown in F20 4. To start, hold the top of the blower firmly with your left hand. Pull the starter knob slowly until you feel it engage and then give it a vigorous strong pull.

  • Page 18: Adjusting Idle Speed, Stopping Engine

    English ADJUSTING IDLE SPEED [130BT] - The idling speed is set for 3000 rpm at the factory. If it is necessary to adjust the idle speed, use the adjustment screw on the top side of carburetor. (1)Idling Adjustment Screw [350BT/BF] [370BTS/BFS] [380BTS/BFS] - The idling speed is set for 2200 rpm [350BT/BF] or 2000 rpm [370BTS/BFS] [380BTS/BFS] at the factory.

  • Page 19: Air Cleaner, Maintenance

    A clogged air filter may increase fuel consumption while cutting down the engine power. - Never operate the blower without an air filter or with a deformed or broken filter element because unfiltered dusty air will quickly ruin the engine.

  • Page 20: Fuel Filter, Spark Plug, Muffler, Spark Arrester

    WARNING - Periodically inspect the muffler for loose fasteners, damage or corro- sion. If any sign of exhaust leakage is found, do not use the blower and have it repaired immediately. 1. Remove the muffler, insert a screwdriver into the vent, and wipe away any carbon buildup.

  • Page 21: Cooling System, Air Inlet Net, Sholder Strap, Storage

    (1)Net WARNING Never use the blower without the net on the blower. Before each use, check that the net is attached in place and is free from any damage. SHOLDER STRAP - If the shoulder strap is damaged it may break during use, thus causing the product to fall and resulting in personal injury.

This manual also for:

130bt, 350bf, 370bfs, 380bfs

Comments to this Manuals

Symbols: 0
Latest comments: