7.4 Exhaust system
WARNING!
After a test run, do not touch the
muffler until it cools.
Risk of burn injury. Use protective
gloves.
7.4.1 Dismantling the exhaust system
1.
Remove the four screws of the exhaust system.
2.
Take off the gasket and the cooling plate.
7.4.2 Assembling the exhaust system
1.
Clean the spark-arrester screen with a wire brush
as needed. Replace the spark-arrester screen as
needed.
2.
Replace the cooling plate and the gasket.
3.
Fasten the four screws of the exhaust system.
7 Repairs
8015-010
8015-014
23