Cylinder And Crankshaft - Husqvarna 356BTx Workshop Manual

7.7 Cylinder and crankshaft

7.7.1 Dismantling the cylinder and crankshaft
1. Take out the fan package, motor package
included, from the chassis according to
Dismantling the motor package and fan spiral on
page 26.
2. Dismantle the four screws of the cylinder. Check
that the 2 guide pins remain in the material.
3. Take out the package and the circlips.
4. Take out the piston bolt.
5. Dismantle the gudgeon pin bearing.
6. Dismantle the four screws of the crankhouse
cover.
7. Take off the cover.
7 Repairs
8015-021
8015-034
8015-022
31