Select a Touch Screen Profile to Optimize Performance
Optimize screen interactions by selecting a touch screen profile designed
specifically for your use case. For example, if you wear gloves, set the touch screen
profile to Glove use enhanced for the best touch screen response.
Note: Maximum glove thickness of 2 mm (0.08 inches) for touch screen response.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Choose one of the following options:
4. Exit the Settings app.
Configure the Screen Backlight
The display has an ambient light sensor that automatically adjusts the backlight
intensity to conserve power and ensure the display is readable. You can also
manually set the backlight intensity if you do not want to use the automated
adaptive brightness feature.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Choose one of the following options:
About the Good Read LED
The Good Read LED indicates the status of the scanner. To learn more about how
to use and configure the imager engine for scanning, see
Engine
Dolphin CT60 Mobile Computer
> Honeywell Settings > Touch Screen Profile.
•
Normal mode
•
Finger enhance mode
•
Glove enhance mode
•
Stylus enhance mode
> Display.
•
To have the computer automatically adjust the brightness for your work
environment, turn on the Adaptive brightness setting. You can tap Adaptive
brightness to toggle the feature on or off.
•
To set the brightness level manually, verify the Adaptive brightness feature
is turned off, and tap Brightness level. Adjust the slider to set the brightness
level.
beginning on page 35.
Chapter
3:
Use the Image
15