Note: CT40-L0N/CT40P-L0N models do not include a WWAN radio. Memory Card Specifications Honeywell recommends the use of Single Level Cell (SLC) industrial grade microSD™ or microSDHC™ memory cards with mobile computers for maximum performance and durability. Contact a Honeywell sales representative for additional...
Page 3
Mobile Computer Features Imager Window (LED/Laser Aperture) Speaker Microphone Scan Status LED Front Facing Camera (model dependent) Battery Status/ Power Button Notification LED Push-to-Talk Touch Panel Button (model dependent) Scan Button Scan Button Microphone Speaker...
Page 4
Note: Hand strap not shown. Camera Lens Laser Safety and Flash Label Location BLE Speaker Out (model dependent) Volume Button Scan Button SIM Card Door MicroSD Card Door USB, Type C (model dependent) Audio Jack Pin (model dependent) I/O Connector...
Page 5
Battery Latch (Models Battery Latch (Model CT40-L0N-xxxxxAx, CT40-xxx-xxxxx0x) CT40-xxx-xxxxxBx, CT40-xxx-xxxxxHx, and all CT40XP) Battery (Refer to page...
Page 6
Install a microSD Card (Optional) Note: Format the microSD card before initial use. Note: Always power off the computer before attempting to install or remove a card.
Page 7
Install a microSIM Card Note: Phone feature is only available on CT40-L1N/CT40P-L1N models. On all models, the SIM slot supports use of a UICC card for NFC Secure Element NFC link encryption. Note: Always power off the computer before attempting to install or remove a card.
Avant d’essayer d’utiliser, de charger ou de remplacer la batterie de l’appareil, lisez attentivement toutes les étiquettes, marquages et documentation du produit fournis dans la boîte ou en ligne à sps.honeywell.com. Pour en savoir plus sur l’Entretien de Batteries pour Appareils Portables, consultez-le honeywell.com/PSS-BatteryMaintenance.
Page 9
CT40 Models Model Configuration Battery P/N Power x = configuration variations CT40-xxx-xxxxx0x 318-005-011 3.85 VDC, 15.5 watt-hour CT40-xxx-xxxxxHx 318-055-017 3.85 VDC, 15.5 watt-hour 318-055-H67 CT40-LON-xxxxxAx 318-055-015 3.85 VDC, 15.5 watt-hour 318-055-067 CT40-xxx-xxxxxBx 318-055-015 3.85 VDC, 15.5 watt-hour 318-055-067 CT40-xxx-xxxxxDx 318-055-D67 3.85 VDC, 15.5 watt-hour Configuration number (CN) is located on the label in the battery well of the mobile computer.
Page 13
Charge the Mobile Computer The mobile computer ships with a partially charged battery. Charge the battery with a CT40 series charging device for a minimum of 4 hours. Using the computer while charging the battery increases the time required to reach a full charge.
Turn Power On/Off The first time you power on the computer, a Welcome screen appears. You can either scan a configuration barcode or use the Wizard to manually set up the computer. Once setup is complete, the Welcome screen no longer appears on startup and Provisioning Mode is automatically turned off (disabled).
Swap Battery Mode Swap Battery mode places the computer in a low power state so that the battery can be removed for a short time. This feature is not available on all models. To activate Swap Battery mode: Press and hold the Power button until the options menu appears.
About the Home Screen Notification / Status Bar Search Bar Home Screen Panel Favorites Tray Navigation Buttons To learn how to customize the Home screen, see the user guide.
Navigation and Function Buttons Button Description Back Return to the previous screen. Home Return to the Home screen. Recent Apps View and switch between recently used apps. Scan Touch the front (on-screen) Scan button to trigger the scanner. Volume Press the top of the button to raise the speaker volume.
Page 18
About Provisioning Mode After completing the out-of-box set up process, Provisioning Mode is automatically turned off. Scanning a barcode to install applications, certificates, configuration files, and licenses on the computer is restricted unless you enable Provisioning Mode in the Settings app. To learn more, see the user guide. Scan a Barcode with the Scan Demo For optimum performance, avoid reflections by scanning the barcode at a slight angle.
Page 19
Sync Data To move files between your CT40 and a computer: Connect the CT40 to your computer using a USB charge/ communication accessory. On the CT40, swipe down from the top of the screen to see the notifications panel. Touch the Android System notification twice to open the options menu.
To search our knowledge base for a solution or to log in to the Technical Support portal and report a problem, go to honeywell.com/PSStechnicalsupport. Documentation Product documentation is available at sps.honeywell.com. Limited Warranty For warranty information, go to sps.honeywell.com and then select Support >...
Page 21
Trademarks Android is a trademark of Google LLC. Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made.