Tap and hold the button to activate the imager and scan a bar code.
Scan Bar Codes
By default, the computer imager is enabled for scanning. It supports
omni-directional (360°) bar code scanning and an aiming beam is provided to help
assist with targeting bar codes.
Before you start scanning bar codes, go into Settings > Honeywell Settings >
Scanning > Internal Scanner and modify the scan profile to enable only the bar
code symbologies that you need. By reducing the active symbology list, you can
increase scan speed.
1. Point the scanner window at the bar code. For optimum performance, avoid
2. Press and hold either side Scan button.
44
The digital scan button appears on the screen when you open any of the apps
you selected during the button setup, see example below.
reflections by scanning the bar code at a slight angle.
Digital Scan Button
Dolphin CT60 Mobile Computer