Disable Or Remove Certificates; About Bluetooth Communications; Connect A Bluetooth Device - Honeywell Dolphin CT60 Series User Manual

Disable or Remove Certificates

If a user or system certificate is compromised, or your organization chooses not to
trust it, you can disable or remove the certificate.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap the name of the certificate to you want to disable or remove. The Security
4. Scroll to the bottom of the screen and tap Disable (for System certificates) or
5. Tap OK.
Note: You can enable a disabled System certificate but if you remove a User certificate, you
must install it again to enable it.

About Bluetooth Communications

Your mobile computer is equipped to communicate with other devices using
Bluetooth technology. The Bluetooth radio must be turned on to discover, pair and
connect to other Bluetooth devices. System bar icons indicate Bluetooth radio
status.

Connect a Bluetooth Device

To connect to a Bluetooth device, you must turn on the Bluetooth radio and then
select the device from a list of discovered devices.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap
4. Select a device on the list to initiate a pairing request.
5. When the pairing request message appears:
Dolphin CT60 Mobile Computer
> Security & location > Advanced > Encryption &
credentials.
The trusted credentials screen has two tabs:
System shows Certificate Authorities (CA) certificates permanently installed
•
on the computer. They can only be disabled.
• User shows CA certificates you have installed yourself. You can remove these
certificates.
certificate screen appears.
Remove (for User certificates).
> Connected devices .
Pair new device. A list of Bluetooth devices appears.
73