Change the Screen Lock to Protect the Computer
After you start using the computer, you should change the screen lock to prevent
unauthorized persons from accessing the computer after the screen lock activates,
unless they input the correct password, pin, or pattern.
The recommended setting for the Screen Lock is to enable a Password lock. Use a
strong password value (e.g., include numbers, characters, special characters, and
mix character case).
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Choose one of the following options:
4. Follow the on-screen prompts to complete the setup.
5. Exit the Settings app.
Select a Touch Screen Profile
Optimize screen interactions by selecting a touch screen profile designed
specifically for your use case. For example, if you wear gloves, set the touch screen
profile to Glove use, which is enhanced for the best touch screen response.
This feature is only available on CT45 XP models.
Note: Maximum glove thickness of 2 mm (0.08 inches) for touch screen response.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Choose one of the following options:
4. Exit the Settings app.
14
> Security > Screen lock.
•
None
•
Swipe
•
Pattern
•
PIN
•
Password
> Honeywell Settings > Touch Screen Profile.
•
Normal mode
•
Finger enhance mode
•
Glove enhance mode
•
Stylus enhance mode
CT45/CT45 XP Mobile Computer Series User Guide