Select A Sim Card Slot; Activate The Phone - Honeywell Dolphin CT60 Series User Manual

Select a SIM Card Slot

CT60 WWAN mobile computers (model CT60L1N) come equipped with two SIM
card slots. The dual slots give you the flexibility to install two micro-SIM cards in
the computer so that you can then activate and switch between them whenever
you choose. Switching is easy via the SIM selection app.
Note: The device will only connect to one SIM card carrier at a time.
To switch between SIM Card slots:
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap SIM Selection
3. Under Select New Configs, tap the drop down arrow
4. Select either Slot 1 for SIM 1 or Slot 2 for SIM 2.
5. Tap the drop down arrow
6. Select a cellular carrier.
7. Tap Apply and then OK to verify the change.
8. Tap OK again when the "Settings are saved" message appears.
Note: If the wrong carrier is selected, the computer will either connect to the wrong network
or not connect at all.

Activate the Phone

You use a SIM card to activate the phone on your CT60 WWAN model computer
(CT60L1N). You can purchase the micro SIM card from your network provider.
Dolphin CT60 WWAN models include two SIM card slots (SIM 1 and SIM 2) for
multiple network provider flexibility.
Warning: If you have a CT60 model certified for use in hazardous
1. Activate and configure the SIM slot you are installing the card in, see
2. Press and hold the Power button until the options menu appears.
3. Tap Power Off.
48
Under Current Config the active SIM slot appears with the carrier setting you
selected.
locations, read
SIM Card Slot on page 48.
.
next to Carrier Config.
Important Information
next to SIM slot.
on page 5.
Dolphin CT60 Mobile Computer
Select a