Install Software Updates With Autoinstall; Optional Microsd Card Method - Honeywell Dolphin CT60 Series User Manual

Install Software Updates with AutoInstall

Important: The Dolphin CT60 must have power for the entire length of the upgrade process or it
could become unstable. Do not attempt to remove the battery during the process.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap the toggle button to turn Provisioning mode On.
4. Save the upgrade file (*.zip or *.apk) in one of the following folders on the CT60
5. Swipe up from the bottom of the Home screen to access all apps.
6. Tap AutoInstall Settings
7. Tap Packages Update from the AutoInstall Settings screen.
8. Once installation is complete, turn Provisioning mode Off.
Note: Some updates do not require the computer to reboot before installation.

Optional microSD Card Method

The CT60 comes equipped with a microSD card socket. You can install an upgrade
from a microSD card you insert in the computer.
Important: The Dolphin CT60 must have power for the entire length of the upgrade process or it
could become unstable. Do not attempt to remove the battery during the process.
1. On the CT60, swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap the toggle button to turn Provisioning mode On.
4. Tap AutoInstall Settings
5. Press and hold the Power button, and then tap Power off.
86
> Honeywell Settings > Provisioning mode.
mobile computer:
• Internal shared storage\honeywell\autoinstall
Software upgrades saved to this folder for installation, do not persist when a
Factory Reset or Enterprise data reset is performed.
IPSM card\honeywell\autoinstall
•
Software upgrades saved to this folder, do not persist when a Factory Reset
is performed. However, the upgrade does persist if an Enterprise data reset
is performed.
The computer automatically initiates a reboot and installs the
software upgrade. The system update screen appears during the upgrade pro-
cess. When the update is finished, the lock screen appears.
> Honeywell Settings > Provisioning mode.
and verify Autoinstall is enabled
. Verify Autoinstall is enabled
Dolphin CT60 Mobile Computer
.
.