Process; Process/Pid 1 References - gefran ADV200 WA Functions Description And Parameters List

26 - PROCESS

26.1 - PROCESS/PID 1 REFERENCES

Menu PAR Description
26.1.1 7300 PID 1 dig ref 1
Setting of digital reference 1 for PID 1. This reference defines the setpoint for PID controller functioning.
Menu PAR Description
26.1.2 7302 PID 1 ref 1 src
Selection of the origin (source) of reference signal 1 for the PID 1 setpoint. The PID controller reference val-
ues can be selected from those listed in the "L_PIDREF" selection list.
Menu PAR Description
26.1.3 7304 PID 1 dig ref 2
Setting of digital reference 2 for PID 1. This reference defines the setpoint for PID controller functioning.
Menu PAR Description
26.1.4 7306 PID 1 ref 2 src
Selection of the origin (source) of reference signal 2 for the PID 1 setpoint. The PID reference values can be
selected from those listed in the "L_PIDREF" selection list.
Menu PAR Description
26.1.5 7308 PID 1 ref function
This parameter is used to adjust reference 1 and 2 analog input signals for the PID1 controller:
0 Ref1
1 Ref2
2 Src selection
3 Ref1+Ref2
4 Ref1-Ref2
5 Aver ref1 ref2
134
UM Typo FB BIT
PID1U FLOAT
UM Typo FB BIT
LINK 16/32BIT
UM Typo FB BIT
PID1U FLOAT
UM Typo FB BIT
LINK 16/32BIT
UM Typo FB BIT
ENUM
Def Min
0.0 CALCF
Def Min
7300 0
Def Min
0.0 CALCF
Def Min
7304 0
Def Min
Ref1 0
ADV200 WA • Functions description and parameters list
Max Acc Mod
CALCF RW VS
Max Acc Mod
16384 RW VS
Max Acc Mod
CALCF RW VS
Max Acc Mod
16384 RW VS
Max Acc Mod
5 RW VS