Setting Sensor Log Notification - Panasonic BL-C1A Operating Instructions Manual

Operating Instructions
4.5

Setting Sensor Log Notification

A sensor log sent once a day at a specified time can be checked. To enable Sensor
Log, set Motion Detection for Trigger Setting and check [Enable].
1.
Click [Sensor Log] on the Setup page.
When enabling the image/buffer transfer setting and selecting Motion
Detection in the Trigger page, the Sensor log window is displayed.
2.
Set each parameter.
Note
• Click [Save] to save the settings.
• Clicking [Cancel] cancels your settings without saving changes.
• Clicking [Save] deletes new-arrival sensor logs.
86