Alto-Shaam COMBITHERM CTC Series Operation, Maintenance, Troubleshooting, Wiring Diagrams page 47

Table of Contents

Advertisement

Unit Information
Business Name:
_______________________________________
Model Number:
_______________________________________
12 Month Inspection Checklist
Inspect - The heat exchanger for any signs of major deformation. If yes, immediately remove from service and take corrective
G
action steps.
Inspect - The heat exchanger for any loose/disconnected pipes or flanges. If yes, immediately remove from service and take
G
corrective action steps.
G Inspect & Ensure - Exhaust pipes are exiting the oven cavity
G Inspect - Heat exchanger flange gasket (replace as needed)
G Inspect & Tighten - Heat exchanger flange bolts
G Inspect & Tighten - Heat exchanger burner flange hardware & gasket (replace as needed)
G Inspect & Tighten - Heat exchanger igniter flange hardware & gasket (replace as needed)
G Inspect - Heat exchanger exhaust pipes (ensure they are exiting out past the oven cavity ceiling flange) - ESG models only
G Inspect - Oven cavity ceiling flange & flange gasket - ESG models only
G Tighten - Burner flange bolts
G Tighten - Igniter flange bolts
Inspect - Heat exchanger weep holes to ensure they are free of obstructions (if the hole is obstructed, immediately remove oven
from service and replace the heat exchanger) - Not applicable to CTP/CTC models
E Inspect - Convection elements for signs of cracking, deformation, or damage
Replace - Oven lamp cover(s) & gasket(s)
Descale the oven interior
Inspect - Door gasket (replace as needed)
Wipe down the inner door glass
Inspect - Front drip tray (clean as needed)
Inspect - Front drip tray hose
Inspect - Control overlay
Inspect & Tighten - All electrical connections
Inspect & Tighten - All cooling fans for proper operation
EB Electric boiler units only
M N - 3 5 9 4 9
R e v 0 4
G Gas units only
0 6 / 1 6
C o m b i t h e r m ® C T P R O f o r m a n c e ™ S e r i e s
Cleaning and Maintenance
12 Month Inspection Start Date: ______________________________
E
Electric units only
Serial Number: ______________________________
T e c h n i c a l S e r v i c e M a n u a l
4 7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Combitherm ctp seriesCombitherm ct proformance 6-10eCombitherm ct proformance 10-10eCombitherm ct proformance 7-20eCombitherm ct proformance 10-20eCombitherm ct proformance 20-10e ... Show all

Table of Contents