Introduction; Installation; Soft/Hardware Requirements; Installation Process - Siemens FXS901 User Manual

1 INTRODUCTION

FXS901 software is mainly used for the engineering commissioning and maintenance of the FC901/FC2005
fire alarm system. Two versions of the software are available for the different channels, FXS901-U2 for the
Desigo version and FXS901-U3 for the Cerberus Pro version.

2 INSTALLATION

2.1

SOFT/HARDWARE REQUIREMENTS

Operation system: Microsoft Windows XP-SP3 (or higher version), Windows 7, Windows 10
－
－ USB port
CPU: PIII 1.0GHZ
－
－ Memory: 512M
Hard disk: 10G
－
－ Display resolution: 1024*768
2.2

INSTALLATION PROCESS

The FXS901 tool installation packages are "FXS901-U2 Setup.msi" for Desigo version and "FXS901-U3
Setup.msi" for Cerberus version. Follow the below steps to install the software:
1. Double click "FXS901-U2 Setup.msi" or "FXS901-U3 Setup.msi", and then the installation wizard
pops up.
2. Click "Next", and select the installation folder. Default folder is: C:\Program Files
(x86)\FXS901-U3\FXS901-U3 Configuration Tool\
2/49 A6V10336897_d_en_