Vega Tp-11" Tab - Vega Absolute TP-11 User Manual

Vega TP-11 / User Manual
«VEGA TP-11» TAB
The "Vega TP-11" tab contains the settings of the connected device.
Current state – displays the current parameters of the device - the internal temperature
of the device, the battery level and the current LoRaWAN class.
Guard settings – allows to setting security inputs. Alarm message can be sent by the
short or open security circuit or in both cases.
"Current low threshold" and "Current high threshold" parameters allow setting current
value range, when the measurements are out of which the device will switch in alarm mode.
Data collection period may be setting independently for that mode in a group of parameters
"Data transmission settings".
Current threshold set in mA multiplied by 100. In picture above, you can see the low
threshold value is 200 and high – 2500. It means the low threshold of current value is 2 mA
and high is 25 mA.
Data transmission settings – a group of parameters that allows you to configure the
collection and transmission periods, and the time zone for the internal clock of the device will
be set which.
Revision 09 08 April 2020
–
23