Connection To The Device - Vega Absolute TP-11 User Manual

The application window contains three tabs – device info, LoRaWAN settings and
device settings.
The language selection menu is in the upper right corner.

CONNECTION TO THE DEVICE

For the connection to the device, perform the following steps:
1. Connect the USB cable to the device.
2. Start the "Vega LoRaWAN Configurator" application.
3. Click the "Connect" button in the menu on the left.
The application automatically recognizes the type of device, and the device selection
menu becomes inactive.
To read the settings from the device, you need to click the "Get settings" button, until
this point the application will display the default settings or from the last connected device.
16
Vega TP-11 / User Manual
Revision 09 – 08 April 2020