Table of Contents
Advertisement
M-BUS-2 / User Manual
4 VEGA LORAWAN CONFIGURATOR
The "Vega LoRaWAN Configurator" application (hereinafter referred to as the
configurator) is intended for setting up the device via USB.
The configurator has two modes of operation - "Simple" and "Expert". In the "Simple"
mode, only basic settings are available. In the "Expert" mode, the basic settings, advanced
settings and the ability to check the coverage area of the signal from the gateways are available.
Next, the work of the application is considered in the "Expert" mode.
INTERFACE OF THE APPLICATION
The "Vega LoRaWAN Configurator" application does not require the special installation.
When the executable file is launched, the window for working with the application appears.
The menu on the left allows you to switch between the "Simple" and "Expert" modes,
select the device model, connect to the device or disconnect from it, get and apply settings.
Revision 09- 06 July 2021
15
Advertisement
Table of Contents
