Converter Tp-11 Receives Packets Of The Following Types - Vega Absolute TP-11 User Manual

Vega TP-11 / User Manual

CONVERTER TP-11 RECEIVES PACKETS OF THE FOLLOWING TYPES

1. Query of readings log send by application on LoRaWAN port 2
Size in bytes
1 byte
Upon receiving this package, the converter will perform an extraordinary polling of
connected sensor and send packet with current state.
2. Output on command send by application on LoRaWAN port 2
Size in bytes
1 byte
1 byte
1 byte
Upon receiving this package TP-11 will close the correspond output and transmits the
packet with current readings.
3. Output off command send by application on LoRaWAN port 2
Size in bytes
1 byte
1 byte
Upon receiving this package TP-11 will unclose the correspond output and transmits
the packet with current readings.
4. Real-time clock adjustment – send by application on LoRaWAN port 4
Size in bytes
1 byte
8 bytes
5. Packet with request of settings – sent by application on LoRaWAN port 3
Size in bytes
1 byte
Answering that packet, the device sent the packet with settings.
Revision 09 08 April 2020
–
Field description
Packet type, this packet == 2
Field description
Packet type, this packet == 3
Output no. (1 - 2)
Output ON for the time in seconds (1...255), (0 –
forever ON).
Field description
Packet type, this packet == 5
Output no. (1 - 2)
Field description
Packet type, this packet == 255
The value in seconds for which you need to
adjust the time.
Can be positive or negative
Field description
Packet type, this packet == 1
Data type
uint8
Data type
uint8
uint8
uint8
Data type
uint8
uint8
Data type
uint8
int64
Data type
uint8
27