Connecting Via Usb - Vega Absolute TP-11 User Manual

CONNECTING VIA USB

Vega TP-11 adjusted with the "Vega LoRaWAN Configurator" application (See part 4).
Before connecting the device to the computer for the first time, you must install the
driver for the COM port stsw-stm32102, which can be downloaded from iotvega.com. After
running the executable file VCP_V1.4.0_Setup.exe, the installer window will appear:
In this window, you need to click Next, then Install, and then the installation will begin.
When the installation is completed successfully, the following screen appears:
After pressing Finish the driver is ready for operation, - it is possible to connect the
converter via USB.
14
Vega TP-11 / User Manual
Revision 09 – 08 April 2020