Login To The Cgline+ Webserver; Modifying Of The Language, Date And Time - Eaton CGLine+ Web Controller Installation And Operating Instructions Manual

6.4 Login to the CGLine+ webserver

To setup the networks settings to the IT pretendings, it is necessary to log in as „Admin" with factory default password
"EATON" , see above. After loggin in, the following screen appears:
1

6.5 Modifying of the language, date and time

1
4
Installation and Operating Instructions CGLine+ Web-Controller 40071860236 (E) February 2019 www.eaton.com
2
3
4
6 First commissioning and modifying network settings
5
The submenus appear. In
the submenu „configura-
tion" 1 , It is possible to
change the network set-
tings.
To change the language
to English please click on
"Configuration" 1 in the
register "General" . The
2
language "English" can
now be selected in the top
selection field .
3
Note: It is recommended
to change passwords after
commissioning to prevent
unauthorized use.
To change the date
and time, go to
„Configuration" 1 in the
register „General" . In
2
the "Time" field, enter the
system clock time (format
4
SS:MM) .
In the "Date" field please
enter the Date (format
5
MM/DD/YYYY) .
11