Modifying Of The Network Settings - Eaton CGLine+ Web Controller Installation And Operating Instructions Manual

6 First commissioning and modifying network settings

6.6 Modifying of the network settings

2
1
12
Installation and Operating Instructions CGLine+ Web-Controller 40071860236 (E) February 2019 www.eaton.com
3
4
The network settings
of the CGLine+ Web-
Controller can be modified
on the network tab in
2
the configuration menu
. Operation via DHCP
1
(dynamic address assign-
ment) and DNS (address-
ing via the names) is pos-
sible.
The CGLine+ Web-
Controller is supplied
with a factory-set static IP
address of 192.168.1.200
3 . Operation via DHCP is
possible but in this case it
is recommended to select
static DHCP address
assignment or to work
with DNS and a fixed host
name.
The new network settings
are adopted via "Save"
and following rebooting
4 the controller can then
be accessed via its new
settings.
The CGLine+ Web-
Controller can now be
integrated in the custom-
er's intranet. The access
from any PC workstation
in the intranet via a stan-
dard webbrowser is pos-
sible now.