Login To The Cgline+ Webserver; Modifying Of The Language, Date And Time - Eaton CGLine+ Web-Controller Installation And Operating Instructions Manual

6 .4 Login to the CGLine+ webserver

To setup the networks settings to the IT pretendings, it is necessary to log in as „Admin" with factory default password "EATON",
1

6 .5 Modifying of the language, date and time

1
4
Installation and Operating Instructions CGLine+ Web-Controller 40071860236 (E) February 2019 www.eaton.com
2
3
4
6 First commissioning and modifying network settings
5
The submenus appear. In
the submenu „configuration"
, It is possible to change
1
the network settings.
To change the language
to English please click on
"Configuration" in the
1
register "General". 2 The
language "English" can now
be selected in the top selec-
tion field 3 .
Note: It is recommended
to change passwords after
commissioning to prevent
unauthorized use.
To change the date and
time, go to „Configuration"
1 in the register „General"
2 . In the "Time" field, enter
the system clock time (for-
4
mat SS:MM) .
In the "Date" field please
enter the Date (format MM/
5
DD/YYYY) .
11