Troubleshooting; Recycling And Disposal - German pool RDC Series User Manual

Troubleshooting

Fault
Excessive vibration
Light on but motor does
not work
Both light and motor do
not work
Suction performance
reduced

Recycling and Disposal

Cause
The appliance is not installed properly on the brackets
The fan blade is damaged
The fan motor is not fixed tightly
The fan blade is jammed
The motor is damaged
Light bulb blown
Power connection loose
Speed may be too low
Distance between the cooker hood and the hob is too
great
Top vent might be obstructed
Optional vent kit might be twisted
Waste electrical products not be disposed of with household waste. Please
recycle where facilities exist. Check with your Local Authority or retailer for
recycling advice.
The symbol on the product or its packaging indicates that this product
should be handed over to an electric and electronic equipment collection
point for recycling.
On ensuring that this product is disposed of correctly, you will help to avoid
possible negative consequences for the environment and public health,
which could occur if this product is not handled correctly. To receive
more detailed information about recycling this product, contact your local
government, domestic waste disposal services or the outlet where the
product was bought.
P.12
Solution
Take down the appliance
and check it is properly
fixed
Switch off the appliance.
Contact Customer
Service Centre
Check power supply
Select a higher speed
Readjust the distance to:
Gas hobs: 750mm
Electric hobs: 650mm
Clear any obstruction
Ensure that the vent kit is
fitted to the manufacturer
instructions