Safety Warnings - Aastra TA7102i Hardware Installation Manual

TA7102i Hardware Installation

Safety Warnings

5.3
This section lists the following safety warnings:
• Circuit Breaker (20A) Warning
• TN Power Warning
• Product Disposal Warning
• No. 26 AWG Warning
• WAN, LAN, Phone-Fax 1 and Phone-Fax 2 Connectors Warning
• Socket Outlet Warning
Circuit Breaker (20A) Warning
Warning: This product relies on the building's installation for short-circuit (overcurrent)
protection. Ensure that a fuse or circuit breaker no larger than 120 VAC, 20A U.S. (240 VAC,
10A international) is used on the
phase conductors (all current-carrying conductors).
TN Power Warning
Warning: The device is designed to work with TN power systems.
Product Disposal Warning
Warning: Ultimate disposal of this product should be handled according to all national laws and
regulations.
No. 26 AWG Warning
Warning: To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line
cord.
WAN, LAN, Phone-Fax 1 and Phone-Fax 2 Connectors Warning
Warning: Do not connect the WAN, LAN, Phone-Fax 1 and Phone-Fax 2 connectors directly to
the Public Switched Telephone Network (PSTN), to an off premise application, an out of plant
application, any exposed plant application, or to any equipment other than the intended
application, connection may result in a safety hazard, and/or defective operation and/or
© 2014 Aastra Sweden | 153_1531 ANF 90114| A | 2014-01-24 36