Table of Contents
Advertisement
Wall-Mounting
•
To wall-mount the TA7102i:
1. Disconnect all of the cables from the TA7102i before mounting.
2. Ensure that the wall you are using is smooth, flat, dry and sturdy. Attach a piece of plywood,
approximately 250 mm x 200 mm x 12 mm (10 inches x 8 inches x 0.5 inches) securely to
the wall, if necessary.
3. Position the TA7102i against the wall (or plywood) as illustrated in Figure 4.
Figure 4: Bottom View - Wall Mounting Screw Holes
4. Mark the position of the screw holes on the wall. Drill the two holes and install two screws.
5. Place the screw holes of the TA7102i over the screws installed in the previous step.
6. Proceed to Hardware Installation.
Free Standing Unit
When installing the TA7102i on a desk or table, it should be located at least 20 cm from your
monitor, computer casing or other peripherals, including speakers. Never put books or paper on
the TA7102i.
© 2014 Aastra Sweden | 153_1531 ANF 90114| A | 2014-01-24
You can position the TA7102i any way you want.
Rear
Screw holes
Front
18
TA7102i Hardware Installation
Hide quick links:
Advertisement
Table of Contents
