Table of Contents
Advertisement
Preventing Electrostatic Discharge Damage
Wear an ESD-preventive wrist strap, ensuring that it makes good skin contact. Connect the clip
to earth ground to channel unwanted ESD voltages to ground safely.
Required Mounting Tools and Equipment
3.3
You will need the following tools and parts to properly install the TA7102i:
•
Screwdriver as required for attaching brackets to rack or wall.
•
Screws and anchors for wall-mounting, if required.
•
Four wood screws or other fasteners, for installing the chassis on a wall.
•
ESD-preventive wrist strap.
•
Modem for remote access.
•
RJ-45 cables for the WAN and LAN connections.
Unpacking and Inspection
3.4
If you haven't already done so, unpack the TA7102i device. Carefully remove it from the
package and packing material. The TA7102i package contains the following items:
•
1 x TA7102i unit
•
1 x power cord for the country in which you are using the TA7102i
•
1 x universal power supply
•
1 x 10/100 BaseT Ethernet RJ-45 cable
•
1 x Printed Flyer
You may also need additional 10/100 BaseT Ethernet RJ-45 cables.
Location and Mounting Requirements
3.5
Warning: The analog lines of the TA7102i are not intended for connection to a
telecommunication network that uses outside cable.
Warning: To prevent fire or shock hazard do not expose the unit to rain or moisture.
The TA7102i is suited for use in an office or residential environment where it can be wall-
mounted or free standing.
Location
Install the TA7102i in a well-ventilated location where it will not be exposed to high temperature
or humidity. Do not install the TA7102i in a location exposed to direct sunlight or near stoves or
radiators. Excessive heat could damage the internal components.
When deciding where to position the TA7102i, ensure that:
© 2014 Aastra Sweden | 153_1531 ANF 901 14| A | 2014-01-24 A
In addition, you might need the following external equipment:
16
TA7102i Hardware Installation
Hide quick links:
Advertisement
Table of Contents
