TE Connectivity PRO-CRIMPER III Instruction Sheet

PROPER USE GUIDELINES
Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use and
low volume applications. A wide selection of powered application equipment for extended-use, production operations is available.
The PRO-CRIMPER III Hand Crimping Tool is a "Commercial" grade tool
and is designed primarily for field installation, repair, maintenance work,
or prototyping in industrial, commercial, or institutional applications.
Product crimped with this tool will meet the crimp height requirement for
hand tools in the appropriate Application Specification (114 Series) but
may not comply with other feature parameters of the specification. TE
Connectivity offers a variety of tools to satisfy your performance
requirements. For additional information, contact PRODUCT
INFORMATION at 1-800-522-6752.
Product Family
PIDG* Terminal
PLASTI-GRIP* Terminal
PIDG FASTON*
NOTE: Refer to Catalogs 82004 and 82042 for terminal selection information.
INTRODUCTION
PRO-CRIMPER III Hand Crimping Tool Assembly 58433-3 consists of PRO-CRIMPER III Hand Crimping Tool
Frame 354940-1 and Die Assembly 58423-1. The tool assembly is used to crimp the terminals listed in Figure
1. For additional information on the hand tool frame, refer to Instruction Sheet 408-9930.
Read these instructions thoroughly before using the tool assembly.
© 2019 TE Connectivity Ltd. family of companies.
All Rights Reserved.
*Trademark
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.
PRO-CRIMPER* III Hand Crimping
Tool Assembly 58433-3 with Die
Assembly 58423-1
Jaw
Die
Assembly
Moving Jaw
Ratchet Adjustment Wheel
Insulation Size
Color (AWG)
Red 22-16
Blue 16-14
or
Yellow 12-10
Red 22-18
Terminal
Blue 16-14
PRODUCT INFORMATION 1-800-522-6752
Pivot Pin
Wire
Maximum Insulation
Diameter (mm [in.]) Range (mm [in.])
3.56 [.140] 5.15-5.95 [.203-.234]
4.32 [.170] 5.15-5.95 [.203-.234]
6.35 [.250] 7.94-8.73 [.312-.344]
3.56 [.140] 8.33-9.14 [.328-.360]
4.32 [.170] 8.33-9.14 [.328-.360]
Figure 1
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.te.com.
Instruction Sheet
408-9252
25 JUN 19
Back of Tool
(Wire Side)
PRO-CRIMPER III Hand
Crimping Tool Frame
354940-1 (408-9930)
Handle
Moving
Handle
Strip Length
Rev N
1 of 6