YUNEEC Typhoon Q500 4K Instruction Manual page 30

ST and CGO Binding
Step
Turn on the ST and if required tap the screen outside of the
pop up status window to bypass the RC and WiFi connec on process
Model Select
New Model Typhoon
Step
Tap the Mode Se ect
buton and if required press OK
to bypass any pop up
warnings a erts
Step
Se ect the exis ng mode
for examp e the TYPHOON
you wou d ike to bind to or
create a New Mode and if
required press OK to bypass any
pop up warnings a erts
Step Turn on the TYPHOON
and ensure that the camera is
powered on
Step if required tap the screen
outside of the pop up status
window to bypass the RC and
WiFi connec on process then tap
the F ight Se ngs buton and
press OK to bypass any pop up
warnings a erts
Model: Typhoon Welcome,Pilot 10:48:28 pm 10
Bind
Camera Select
Mode Select
Hardware Monitor
Model Camera
Not connected CGO3_XXXXXXX
Welcome,Pilot 10:48:28 pm 10
Model: Typhoon
Bind
Camera Select
Mode Select
Hardware Monitor
Welcome,Pilot 10:48:28 pm 10
Model: Typhoon
Choose a camera NAME:
C-GO1
C-GO2
C-GO3
C-GO3-Pro
28
Step Tap the Bind buton and
se ect the CGO XXXXXX
camera isted in the co umn under
Camera then enter the password
when prompted
and tap OK ater the connec on
has been estab ished
Step
Tap the Camera Se ect
buton and se ect proper camera
mode isted int the co umn under
Choose a camera then tap OK
ater the connec on has been
estab ished
Step
Tap the Back buton two
mes to return to the main
screen and the camera shou d
automa ca y connect to the
ST
IMPORTANT NOTE: Streaming
video from the camera to the
ST and to a separate
phone tab et or another Yuneec
transmiter persona ground
sta on at the same me is NOT
recommended as it wi resu t in a
very significant ag in the video
down ink