Appendix 10. Method; A10.1 Transducer Block - YOKOGAWA digitalYEWFLO Series User Manual

APPENDIX 10. METHOD

A10.1 Transducer Block

METHOD is a program to facilitate the parameter settings.
Set TR block to "O/S", for parameter setting by METHOD.
(1) Setup Wizard Method
Setup Wizard Method
Display the start message
Check the Mode.Actual
Auto
(automatically judgement)
OOS
Set the following parameter:
TEMPERATURE_UNIT
PROCESS_TEMP
Check the
SENSOR_STATUS
(automatically judgement)
Standard
Jump to method of
FLUID_TYPE
Set the following parameters:
DENSITY_UNIT
PROCESS_DENSITY *1
Do you want to set the
following parameter:
CHARACTERIZE_METER
Display the PV Range value
Display the end message
END
Sub-method
FLUID_TYPE
Do you want to set
No
the following parameter:
FLUID_TYPE
Set the following parameter:
FLUID_TYPE
Liquid: Volume
Gas/Steam: Volume
Liquid: Mass
Gas/ Steam: Mass
END
*1
Built-in
Temp Sensor
Jump to method of
THERMOMETER_FUNCTION
Yes
Set following parameter:
SIZE_SELECT
BODY_TYPE
No
VORTEX_SENSOR_TYPE
K_FACTOR_UNIT
K_FACTOR
Cancel
(Abort)
Setup Wizard terminating
Yes
Gas: STD/ Normal
Set the following parameter:
BASE_TEMP
Set the following parameters:
PRESSURE_UNIT
PROCESS_PRESSURE
BASE_PRESSURE
Set the following parameter:
DEVIATION
*1: Skip mode including
<APPENDIX 10. METHOD>
*1
*1: Skip mode including
*1
*1
*1
FA1001.ai
A10-1
IM 01F06F00-01EN