Omron STC-HD203 Series Product Specifications And User's Manual page 51

White Balance
・Auto (Auto Trace White balance)
AWB Pull-in Speed, AWB Pull-in Delay, Convergence Step can be configurable. This function sets the pull-in
frame and target frame and automatically tracks the changes in the color temperature to adjust the white
balance.
・Full-Open
This function adjusts the white balance regardless of the subject conditions. The control is exercised at all times
without depending on the pull-in frame.
・AWB Hold
When the hold mode is established, the white balance (WB) gain value established at that time is held, and the
AWB operation is stopped.
・Push Lock Function
When the White Balance Mode is set to "2" (Full Open),and White Balance Mode is set to "AWB Hold". The white
balance gain values are kept and white balance is stopped. This function that saves the data in the EEPROM is
called the Push Lock Function.
When AWB hold mode is established, the white balance gain values at this time are saved in the registers, and
the white balance gain is held. When push the "Push Lock" button on the control software, the mode turn from
Full-Open to AWB Hold. Save the White Balance mode = AWB Hold on EEPROM
・USER mode
In the normal user mode, the white balance can be adjusted exactly as desired. To set the white balance through
User Mode fixed coordinate R/G (0x036 - 0x37) and User Mode fixed coordinate B/G 0x38-0x39)
STC-HD203DV / STC-HD203DV-CS / STC-HD203SDI / STC-HD203SDI-CS
Product Specifications and Users Guide
No. 13S054-10
51/78